ZyXEL Communications P-2302R Series User Manual

Page of 384
P-2302R Series User’s Guide
111
Chapter 8 VoIP Screens
8.6  QoS Configuration
Click VoIP in the navigation panel and then QoS to display the following screen.
Figure 40   QoS
The following table describes the labels in this screen.
Table 24   QoS
LABEL
DESCRIPTION
SIP TOS Priority
Type a priority for voice transmissions. The Prestige applies Type of Service 
priority tags with this priority to voice traffic that it transmits. 
RTP TOS Priority
Type a priority for voice transmissions. The Prestige applies Type of Service 
priority tags with this priority to RTP traffic that it transmits.
Enable VLAN Tag
Enable VLAN tagging if the Prestige needs to be a member of a VLAN group in 
order to communicate with the SIP server. Your LAN and gateway must also be set 
up to use VLAN tags. Some switches also give priority to voice traffic based on its 
VLAN tag. 
Disable VLAN tagging if the Prestige does not need to be a member of a VLAN 
group to communicate with the SIP server.
Voice VLAN ID
Type the VLAN ID (VID) from 0 to 4095 for the Prestige to add to voice Ethernet 
frames that it sends out to the network.
Apply
Click Apply to save your changes back to the Prestige.
Reset
Click Reset to begin configuring this screen afresh.