ZyXEL Communications P-2302R Series User Manual

P-2302R Series User’s Guide

Chapter 21 Introducing the SMT

224

This chapter explains how to access and navigate the System Management Terminal and gives 
an overview of its menus.

The Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can 
access through a telnet connection. This chapter shows you how to access the SMT (System 
Management Terminal) menus, how to navigate the SMT and how to configure SMT menus.

The following procedure details how to telnet into your Prestige.

1 In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 

192.168.1.1” (the default IP address) and click OK. 

2 For your first login, enter the default password “1234”. As you type the password, the 

screen displays an asterisk “*” for each character you type.

Figure 105   Login Screen

3 After entering the password you will see the main menu.

Please note that if there is no activity for longer than five minutes (default timeout period) 
after you log in, your Prestige will automatically log you out. You will then have to telnet into 
the Prestige again. You can use the web configurator or the CI commands to change the 
inactivity time out period. 

The SMT (System Management Terminal) is the interface that you use to configure your 
Prestige. 

Password : xxxx