ZyXEL Communications P-2302R Series User Manual

P-2302R Series User’s Guide

295

Chapter 32 System Information and Diagnosis

Figure 167   Menu 24.2.1 System Maintenance: Information 

The following table describes the fields in this menu.

Note: The console port is internal and reserved for technician use only.

You can set up different port speeds for the console port through Menu 24.2.2 – System 
Maintenance – Console Port Speed. Your Prestige supports 9600 (default), 19200, 38400, 
57600 and 115200 bps. Press [SPACE BAR] and then [ENTER] to select the desired speed in 
menu 24.2.2, as shown in the following figure.

                    Menu 24.2.1 - System Maintenance - Information

                  Name: P2302R.Zyxel.com
                  Routing: IP
                  ZyNOS F/W Version: V3.60(MM.4)b1 | 11/08/2005
                  Country Code: 255

                  LAN
                    Ethernet Address: 00:13:49:52:78:33
                    IP Address: 192.168.1.1
                    IP Mask: 255.255.255.0
                    DHCP: Server

                        Press ESC or RETURN to Exit:

Table 120   Menu 24.2.1 System Maintenance: Information

Name

Displays the system name of your Prestige. This information can be changed 
in Menu 1 – General Setup.

Routing

Refers to the routing protocol used.

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware 
version. ZyNOS is a registered trademark of ZyXEL Communications 
Corporation.

Country Code

This is the country code of the firmware.

LAN

Ethernet Address Refers to the Ethernet MAC (Media Access Control) of your Prestige.

IP Address This is the IP address of the Prestige in dotted decimal notation.

IP Mask This shows the subnet mask of the Prestige.

DHCP This field shows the DHCP setting (None, Relay or Server) of the Prestige.