ZyXEL Communications P-2302R Series User Manual
P-2302R Series User’s Guide
Chapter 2 Introducing the Web Configurator
46
1
P
ress the RESET button for five to ten seconds (release it when the PWR/VoIP LED
begins to blink). When the PWR/VoIP LED starts blinking, the defaults have been
restored and the Prestige restarts. Otherwise, go to step 2.
restored and the Prestige restarts. Otherwise, go to step 2.
2
Di
sconnect and reconnect the Prestige’s power.
3 Wait for the PWR/VoIP LED to stop blinking and stay on steady.
4 Press the RESET button for five to ten seconds (release it when the PWR/VoIP LED
begins to blink). When the PWR/VoIP LED starts blinking, the defaults have been
restored and the Prestige restarts. Otherwise, go to step 2.
restored and the Prestige restarts. Otherwise, go to step 2.
2.4 Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the MAIN MENU
screen.
screen.
Note: Click the Help icon (located in the top right corner of most screens) to view
online help.
• Click WIZARD for initial configuration.
• Click a link under ADVANCED to configure Prestige features.
• Click MAINTENANCE to view information about your Prestige or upgrade
• Click a link under ADVANCED to configure Prestige features.
• Click MAINTENANCE to view information about your Prestige or upgrade
configuration/firmware files. Maintenance includes the Status, DHCP Table, F/W
(firmware) Upload, Configuration (Backup, Restore, Defaults) and Restart screens.
(firmware) Upload, Configuration (Backup, Restore, Defaults) and Restart screens.
• Click LOGOUT at any time to exit the web configurator.