ZyXEL Communications MES3500-24 User Manual

 Chapter 9 VLAN

MES3500-24/24F User’s Guide

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port. 
See 

 for more information on static VLAN. Click the VLAN Port Setting link 

in the VLAN Status screen.

Advanced Application > VLAN > VLAN Port Setting 

The following table describes the labels in this screen. 

Tagging

Select TX Tagging if you want the port to tag all outgoing frames transmitted with this 
VLAN Group ID.

Add

Click Add to save your changes to the Switch’s run-time memory. The Switch loses these 
changes if it is turned off or loses power, so use the Save link on the top navigation panel to 
save your changes to the non-volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Clear

Click Clear to start configuring the screen again. 

VID

This field displays the ID number of the VLAN group. Click the number to edit the VLAN 
settings. 

Active

This field indicates whether the VLAN settings are enabled (Yes) or disabled (No). 

Name

This field displays the descriptive name for this VLAN group. 

Delete

Click Delete to remove the selected entry from the summary table. 

Cancel

Click Cancel to clear the Delete check boxes.

Advanced Application > VLAN > Static VLAN  (continued)

Advanced Application > VLAN > VLAN Port Setting   

GVRP

GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for 
switches to register necessary VLAN members on ports across the network. 

Select this check box to permit VLAN groups beyond the local Switch.

Port

This field displays the port number.