ZyXEL Communications MES3500-24 User Manual

Chapter 24 Multicast

MES3500-24/24F User’s Guide

Note: Your Switch automatically creates a static VLAN (with the same VID) when you 

create a multicast VLAN in this screen.

Advanced Application > Multicast > Multicast Setting > MVR 

The following table describes the related labels in this screen. 

Advanced Application > Multicast > Multicast Setting > MVR 

Active

Select this check box to enable MVR to allow one single multicast VLAN to be shared 
among different subscriber VLANs on the network. 

Name

Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes. 

Multicast VLAN 
ID

Enter the VLAN ID (1 to 4094) of the multicast VLAN.  

802.1p Priority

Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP 
control packets (belonging to this multicast VLAN). 

Mode

Specify the MVR mode on the Switch. Choices are Dynamic and Compatible. 

Select Dynamic to send IGMP reports to all MVR source ports in the multicast VLAN. 

Select Compatible to set the Switch not to send IGMP reports. 

Port

This field displays the port number on the Switch. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row 
first to set the common settings and then make adjustments on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you make them.