ZyXEL Communications MES3500-24 User Manual
Chapter 28 VLAN Mapping
MES3500-24/24F User’s Guide
239
28.3 Configuring VLAN Mapping
Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as
shown. Use this screen to enable and edit the VLAN mapping rule(s).
shown. Use this screen to enable and edit the VLAN mapping rule(s).
Figure 131
VLAN Mapping Configuration
The following table describes the labels in this screen.
Table 89
VLAN Mapping Configuration
LABEL
DESCRIPTION
Active
Check this box to activate this rule.
Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Port
Type a port to be included in this rule.
VID
Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the packets and will be
translated into the VID you specified in the Translated VID field.
translated into the VID you specified in the Translated VID field.
Translated VID
Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in the packets will be
translated.
translated.
Priority
Select a priority level (from 0 to 7). This is the priority level that replaces the customer
priority level in the tagged packets or adds to the untagged packets.
priority level in the tagged packets or adds to the untagged packets.
Add
Click Add to insert the entry in the summary table below and save your changes to the
Switch’s run-time memory. The Switch loses these changes if it is turned off or loses power,
so use the Save link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Switch’s run-time memory. The Switch loses these changes if it is turned off or loses power,
so use the Save link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel
Click Cancel to reset the fields to your previous configuration.
Index
This is the number of the VLAN mapping entry in the table.
Active
This shows whether this entry is activated or not.
Name
This is the descriptive name for this rule.
Port
This is the port number to which this rule is applied.
VID
This is the customer VLAN ID in the incoming packets.
Translated VID
This is the VLAN ID that replaces the customer VLAN ID in the tagged packets.
Priority
This is the priority level that replaces the customer priority level in the tagged packets.
Delete
Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
button.
Cancel
Click Cancel to clear the Delete check boxes.