ZyXEL Communications ZyWALL 1000 User Manual

Chapter 4 Wizard Setup

ZyWALL USG 1000 User’s Guide

Figure 41   VPN Advanced Wizard: Step 5

The following table describes the labels in this screen.

This summary of VPN tunnel settings is read-only.
Name: Identifies the VPN connection (and the VPN gateway). 

Table 21   VPN Advanced Wizard: Step 5

Summary

Name

This is the name of the VPN connection (and VPN gateway). 

Secure 

Gateway

This is the WAN IP address or domain name of the remote IPSec router. If this field 

displays 0.0.0.0, only the remote IPSec router can initiate the VPN connection.

Pre-Shared 

Key

This is a pre-shared key identifying a communicating party during a phase 1 IKE 

negotiation. 

Local Policy This is a (static) IP address and Subnet Mask on the LAN behind your ZyWALL.

Remote 

Policy

This is a (static) IP address and Subnet Mask on the network behind the remote 

IPSec router.

Remote 

Gateway CLI

These commands set the matching VPN connection settings for the remote gateway. 

If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into 

its command line interface in order to configure it for the VPN tunnel. 
You can also use a text editor to save these commands as a shell script file with a 

“.zysh” filename extension. Then you can use the file manager to run the script in 

order to configure the VPN connection.
See the commands reference guide for details on the commands displayed in this 

list.

Save

Click Save to store the VPN settings on your ZyWALL.