ZyXEL Communications ZyWALL 1000 User Manual

 Chapter 5 Configuration Basics

ZyWALL USG 1000 User’s Guide

If you want to force users to log in to the ZyWALL before the ZyWALL routes traffic for 
them, you might have to configure prerequisites first.

This section introduces some of the management and maintenance features in the ZyWALL. 
Use Host Name to configure the system and domain name for the ZyWALL. Use Date/Time 
to configure the current date, time, and time zone in the ZyWALL. Use Console Speed to set 
the console speed. Use Language to select a language for the web configurator screens.

Use these screens to set which services or protocols can be used to access the ZyWALL 
through which zone and from which addresses (address objects) the access can come. Use 
Dial-in Mgmt for a remote management connection through an external serial modem 
connected to the AUX port.

Example: Suppose you want to allow an administrator to use HTTPS to manage the ZyWALL 
from the WAN. 

1 Create an administrator account (User/Group). 
2 Create an address object for the administrator’s computer (Object > Address).
3 Click System > WWW to configure the HTTP management access. Enable HTTPS and 

add an administrator service control entry.
• Select the address object for the administrator’s computer.
• Select the WAN zone.
• Set the action to Accept.

Guest

Access network services

Ext-User

The same as a User or a Guest. The ZyWALL looks for the specific type in an 

external authentication server. If the type is not available, the ZyWALL applies 

default settings.

Addresses, address groups, schedules. The prerequisites are only used in 

policies to force user authentication

Policy routes, firewall, application patrol, content filter, user groups, VPN

Table 28   User Types

To-ZyWALL firewall, zones, addresses, address groups, certificates (WWW, 

SSH, FTP, Vantage CNM), authentication methods (WWW)