ZyXEL Communications ZyWALL 1000 User Manual
Chapter 6 Tutorials
ZyWALL USG 1000 User’s Guide
133
Figure 60 VPN > IPSec VPN > VPN Gateway > Add
6.2.3 Set up the VPN Connection
The VPN connection manages the IPSec SA. You have to set up the address objects for the
local network and remote network before you can set up the VPN connection.
local network and remote network before you can set up the VPN connection.
1 Click Object > Address > Address. Click the Add icon.
2 Give the new address object a name (“VPN_LOCAL_RANGE”), change the Address
2 Give the new address object a name (“VPN_LOCAL_RANGE”), change the Address
Type to RANGE, and set up the rest of the fields to 192.168.1.33 and 192.168.1.232.
Click OK.
Click OK.
Figure 61 Object > Address > Address > Add
3 Repeat the process to create a new address object for the remote network
(“VPN_REMOTE_SUBNET”, 192.168.1.0/24).
4 Click VPN > IPSec VPN > VPN Connection. Click the Add icon.
5 Give the VPN connection a name (“VPN_CONN_EXAMPLE”), and select the VPN
5 Give the VPN connection a name (“VPN_CONN_EXAMPLE”), and select the VPN
gateway (
) in the VPN Gateway section. Use the default
proposal settings in this example--ESP, Tunnel encapsulation, DES encryption, and
SHA1 authentication--so do not change these settings. In the Policy section, select the
address objects for the local and remote networks. Click OK.
SHA1 authentication--so do not change these settings. In the Policy section, select the
address objects for the local and remote networks. Click OK.