ZyXEL Communications ZyWALL 1000 User Manual

Chapter 10 Interface

ZyWALL USG 1000 User’s Guide

"

You have to set up an ISP account before you create a PPPoE/PPTP 
interface.

This screen lists every PPPoE/PPTP interface. To access this screen, click Network > 
Interface > PPPoE/PPTP.

Figure 139   Network > Interface > PPPoE/PPTP

Each field is described in the table below.

Table 59   Network > Interface > PPPoE/PPTP

#

This field is a sequential value, and it is not associated with any interface.

Name

This field displays the name of the interface.

Base Interface

This field displays the interface on the top of which the PPPoE/PPTP interface 

is.

Account Profile

This field displays the ISP account used by this PPPoE/PPTP interface.

Add icon

This column lets you create, edit, remove, activate, deactivate, connect and 

disconnect interfaces.
To create an interface, click the Add icon at the top of the column. The PPPoE/

PPTP Interface Add/Edit screen appears.
To edit an interface, click the Edit icon next to it. The PPPoE/PPTP Interface 

Add/Edit screen appears.
To remove an interface, click the Remove icon next to it. The ZyWALL confirms 

you want to remove it before doing so.
To activate or deactivate an interface, click the Active icon next to it.  Make sure 

you click Apply to save and apply the change. 
To connect or disconnect an interface, click the Connect icon next to it. You 

might use this icon to test the interface or to manually establish the connection 

for a Dial-on-Demand PPPoE/PPTP interface.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.