ZyXEL Communications ZyWALL 1000 User Manual

 Chapter 36 Services

ZyWALL USG 1000 User’s Guide

The Service Add/Edit screen allows you to create a new service or edit an existing one. To 
access this screen, go to the Service screen (see 

), and click either the 

Add icon or an Edit icon.

Figure 383   Object > Service > Service > Edit

The following table describes the labels in this screen.  

Content

This field displays a description of each service.

Add icon

This column provides icons to add, edit, and remove services.
To add a service, click the Add icon at the top of the column. The Service Add/

Edit screen appears.
To edit a service, click the Edit icon next to the service. The Service Add/Edit 

screen appears.
To delete a service, click the Remove icon next to the service. The web 

configurator confirms that you want to delete the service before doing so.

Table 169   Object > Service > Service (continued)

Table 170   Object > Service > Service > Edit

Name

Type the name used to refer to the service. You may use 1-31 alphanumeric 

characters, underscores(

_

), or dashes (-), but the first character cannot be a 

number. This value is case-sensitive.

IP Protocol

Select the protocol the service uses. Choices are: TCP, UDP, ICMP, and User 

Defined.

Starting Port
Ending Port

This field appears if the IP Protocol is TCP or UDP. Specify the port number(s) 

used by this service. If you fill in one of these fields, the service uses that port. If 

you fill in both fields, the service uses the range of ports.

ICMP Type

This field appears if the IP Protocol is ICMP Type.
Select the ICMP message used by this service. This field displays the message 

text, not the message number.

IP Protocol 

Number

This field appears if the IP Protocol is User Defined.
Enter the number of the next-level protocol (IP protocol). Allowed values are 0 - 

255.

OK

Click OK to

 

save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving your changes.