ZyXEL Communications ZyWALL 1000 User Manual

Chapter 44 Service Control

ZyWALL USG 1000 User’s Guide

Figure 455   System > Dial-in Mgmt  

The following table describes the labels in this screen.

Vantage CNM (Centralized Network Management) is a browser-based global management 
solution that allows an administrator from any location to easily configure, manage, monitor 
and troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for 
details.
If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not 
do any configurations directly to the ZyWALL (using either the web configurator or 
commands) without notifying the Vantage CNM administrator.

Table 213   System > Dial-in Mgmt 

Enable 

Select this check box to turn on dial-in management.

Description

Enter some information about this connection.

Mute

Select this check box to stop the external serial modem from making audible 

sounds during a dial-in management session.

Answer Rings

Set how many times the ZyWALL lets the incoming dial-in management session 

ring before processing it.

Port Speed

Use the drop-down list box to select the speed of the connection between the 

ZyWALL’s auxiliary port and the external modem. Available speeds are: 9600, 

19200, 38400, 57600, or 115200 bps.

Initial String

Type the AT command string that the ZyWALL returns to the external serial 

modem connected to the ZyWALL’s auxiliary port during connection initialization. 

Note: Consult the manual of your external serial modem 

connected to your ZyWALL’s auxiliary port for specific AT 
commands.

Advanced/Basic

Click Advanced to display more configuration fields and edit the details of your 

dial-in management setup.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.