ZyXEL Communications ZyWALL 1000 User Manual

ZyWALL USG 1000 User’s Guide

Use this to restart the device (for example, if the device begins behaving erratically). See also 

 for information on different ways to start and stop the ZyWALL.

If you applied changes in the Web configurator, these were saved automatically and do not 
change when you reboot. If you made changes in the CLI, however, you have to use the 

write

 command to save the configuration before you reboot. Otherwise, the changes are lost 

when you reboot.
Reboot is different to reset; (see 

) reset returns the device to its 

default configuration.
The Reboot screen is part of the Web configurator so that remote users can restart the device. 
To access this screen, click Maintenance > Reboot.

Figure 482   Maintenance > Reboot

Click the Reboot button to restart the device. Wait a few minutes until the login screen 
appears. If the login screen does not appear, type the IP address of the device in your Web 
browser.
You can also use the CLI command 

reboot

 to restart the device.