ZyXEL Communications ZyWALL 1000 User Manual

 Chapter 4 Wizard Setup

ZyWALL USG 1000 User’s Guide

The ZyWALL applies the configuration settings. 

Figure 25   PPTP Encapsulation: Auto: Finish

You have set up your ZyWALL to access the Internet. 

Connection ID

Enter the connection ID or connection name in this field. It must follow the "c:id" 

and "n:name" format. For example, C:12 or N:My ISP. 

This field is optional and depends on the requirements of your DSL modem. 
You can use alphanumeric and -_

:

 characters, and it can be up to 31 characters 

long. 

WAN IP Address 

Assignments

WAN Interface

This displays the identity of the interface you configure to connect with your ISP.

Zone

This field displays to which security zone this interface and Internet connection 

will belong.

IP Address

Enter your WAN IP address in this field. 

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice 

versa. The DNS server is extremely important because without it, you must know the IP address of a 

computer before you can access it. The ZyWALL uses a system DNS server (in the order you specify 

here) to resolve domain names for VPN, DDNS and the time server.

First DNS Server
Second DNS 

Server

Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do 

not configure a DNS server, you must know the IP address of a machine in order 

to access it.

Next

Click Next to continue. 

Table 11   PPTP Encapsulation: Auto (continued)