ZyXEL Communications P-2900-4HB User Manual
Chapter 4 Tutorials
P-2900-4HB User’s Guide
43
3
Log into the ZyXEL Device’s Web Configurator. Configure the Advanced Setup >
LAN screen as shown next. Click Apply.
LAN screen as shown next. Click Apply.
4
Enable DHCP client on computers C1 and C2 by selecting Obtain an IP address
automatically in the network settings. Connect them to the ZyXEL Device’s LAN
through a switch. Each of them should get an IP address respectively.
automatically in the network settings. Connect them to the ZyXEL Device’s LAN
through a switch. Each of them should get an IP address respectively.
4.3.2 Configuring Static IP Addresses
Use this section to configure two static IP addresses for servers A and B.
Computers (C1~C2) also use one static IP address to access the Internet.
Computers (C1~C2) also use one static IP address to access the Internet.