ZyXEL Communications P-2900-4HB User Manual

Chapter 5 LAN Setup

P-2900-4HB User’s Guide

Click Advanced Setup > LAN > Static DHCP to open the Static DHCP screen. 
A DHCP server may assign a different IP address to a computer when its DHCP 

Primary DNS 
Server

Enter the IP addresses of the DNS servers. The DNS servers are 
passed to the DHCP clients along with the IP address and the subnet 
mask.

Secondary DNS 
Server

As above.

Remote DHCP 
Server

If Relay is selected in the DHCP field above then enter the IP address 
of the actual remote DHCP server here.

TCP/IP
IP Address

Enter the IP address of your ZyXEL Device in dotted decimal notation, 
for example, 192.168.100.1 (factory default). 

IP Subnet Mask 

Type the subnet mask assigned to you by your ISP (if given).

RIP Direction

Select the RIP direction from None, Both, In Only and Out Only. The 
RIP Direction field controls the sending and receiving of RIP packets.

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M. The RIP 
Version field controls the format and the broadcasting method of the 
RIP packets that the ZyXEL Device sends (it recognizes both formats 
when receiving).

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol 
used to establish membership in a multicast group. The ZyXEL Device 
supports both IGMP versions 1 (IGMP-v1) and 2 (IGMP-v2). Select 
None to disable it.

Back

Click Back to return to the previous screen without saving.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 8   Advanced Setup > LAN > LAN Setup (continued)