ZyXEL Communications 5 Series User Manual

 Chapter 8 Bridge Screens

ZyWALL 5/35/70 Series User’s Guide

The radio buttons correspond to Ethernet ports on the front panel of the ZyWALL. On the 
ZyWALL 70, ports 1 to 4 are all DMZ ports by default. On the ZyWALL 5 or ZyWALL 35, 
ports 1 to 4 are all LAN ports by default. 

Figure 93   NETWORK > Bridge > Port Roles

The following table describes the labels in this screen. 

After you change the LAN/DMZ/WLAN port roles and click Apply, please wait for few 
seconds until the following screen appears. Click Return to go back to the Port Roles screen.

Figure 94   Port Roles Change Complete

Table 32   NETWORK > Bridge > Port Roles

LAN

Select a port’s LAN radio button to use the port as part of the LAN. 

DMZ

Select a port’s DMZ radio button to use the port as part of the DMZ. 

WLAN

Select a port’s WLAN radio button to use the port as part of the WLAN.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.