ZyXEL Communications 5 Series User Manual
Chapter 9 WAN Screens
ZyWALL 5/35/70 Series User’s Guide
187
Figure 106 NETWORK > WAN > WAN (PPPoE Encapsulation)
The following table describes the labels in this screen.
Table 43 NETWORK > WAN > WAN (PPPoE Encapsulation)
LABEL
DESCRIPTION
ISP Parameters
for Internet
Access
for Internet
Access
Encapsulation
Select PPPoE for a dial-up connection using PPPoE.
Service Name
Type the PPPoE service name provided to you by your ISP. PPPoE uses a service
name to identify and reach the PPPoE server.
name to identify and reach the PPPoE server.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Retype to
Confirm
Confirm
Type your password again to make sure that you have entered is correctly.
Authentication
Type
Type
The ZyWALL supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by this
remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accepts PAP only.
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by this
remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accepts PAP only.