ZyXEL Communications 5 Series User Manual
Chapter 10 DMZ Screens
ZyWALL 5/35/70 Series User’s Guide
214
Figure 118 NETWORK > DMZ > Static DHCP
The following table describes the labels in this screen.
10.4 The IP Alias Screen
Configure IP alias settings to partition a physical network into different logical networks over
the same Ethernet interface.
the same Ethernet interface.
See
for more information on IP alias.
The IP alias IP addresses can be either private or public regardless of whether the physical
DMZ interface is set to use a private or public IP address. Use NAT if you want to make DMZ
computers with private IP addresses publicly accessible. When you use IP alias, you can have
the DMZ use both public and private IP addresses at the same time.
DMZ interface is set to use a private or public IP address. Use NAT if you want to make DMZ
computers with private IP addresses publicly accessible. When you use IP alias, you can have
the DMZ use both public and private IP addresses at the same time.
"
Make sure that the subnets of the logical networks do not overlap.
Table 51 NETWORK > DMZ > Static DHCP
LABEL
DESCRIPTION
#
This is the index number of the static IP table entry (row).
MAC Address
Type the MAC address of a computer on your DMZ.
IP Address
Type the IP address that you want to assign to the computer on your DMZ.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.