ZyXEL Communications 5 Series User Manual

 Chapter 24 Policy Route Screens

ZyWALL 5/35/70 Series User’s Guide

Figure 266   ADVANCED > POLICY ROUTE > Edit

The following table describes the labels in this screen. 

Table 138   ADVANCED > POLICY ROUTE > Edit

Criteria

Active

Select the check box to activate the policy.

Rule Index

This is the index number of the policy route.

IP Protocol

Select Predefined and then  the IP protocol from ALL(0), ICMP(1), IGMP(2), 
TCP(6), UDP(17), GRE(47), ESP(50) or AH(51).
Otherwise, select Custom and enter a number from 0 to 255.

Type of Service

Prioritize incoming network traffic by choosing from Any, Normal, Min Delay, Max 
Thruput, Max Reliable or Mix Cost.

Precedence

Precedence value of the incoming packet. Select a value from 0 to 7 or Any.

Packet Length 

Type a length of packet (in bytes). The operators in the Length Comparison field 
apply to incoming packets of this length.