ZyXEL Communications 5 Series User Manual

 Chapter 36 WAN and Dial Backup Setup

ZyWALL 5/35/70 Series User’s Guide

Figure 370   Menu 2: Dial Backup Setup 

The following table describes the fields in this menu.

"

Consult the manual of your WAN device connected to your Dial Backup port 
for specific AT commands.

      Menu 2 - WAN Setup

 WAN 1 MAC Address:

   Assigned By= Factory default

   IP Address= N/A

 WAN 2 MAC Address:

   Assigned By= Factory default

   IP Address= N/A

 Dial-Backup:

   Active= No

   Port Speed= 115200

   AT Command String:

     Init= at&fs0=0

   Edit Advanced Setup= Yes

Press ENTER to Confirm or ESC to Cancel:

Table 216   Menu 2: Dial Backup Setup

Dial-Backup:

Active

Use this field to turn the dial-backup feature on (Yes) or off (No).

Port Speed

Press [SPACE BAR] and then press [ENTER] to select the speed of the connection 
between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.

AT Command 
String:

Init

Enter the AT command string to initialize the WAN device. Consult the manual of your 
WAN device connected to your Dial Backup port for specific AT commands.

Edit Advanced 
Setup

To edit the advanced setup for the Dial Backup port, move the cursor to this field; 
press the [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 2.1 - 
Advanced Setup. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 
save your configuration, or press [ESC] at any time to cancel.