ZyXEL Communications 5 Series User Manual

 Chapter 42 Remote Node Setup

ZyWALL 5/35/70 Series User’s Guide

See 

 

for details on the Metric field.

If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen.

Table 236   Fields in Menu 11.1 (PPPoE Encapsulation Specific)

Service Name

If you are using PPPoE encapsulation, then type the name of your PPPoE service 
here. Only valid with PPPoE encapsulation.

Authen

This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when requested by this 
remote node. 
CHAP - accept CHAP only. 
PAP - accept PAP only. 

Telco Option

Allocated 
Budget

The field sets a ceiling for outgoing call time for this remote node. The default for this 
field is 0 meaning no budget control. 

Period(hr)

This field is the time period that the budget should be reset. For example, if we are 
allowed to call this remote node for a maximum of 10 minutes every hour, then the 
Allocated Budget is (10 minutes) and the Period(hr) is 1 (hour).

Schedules

You can apply up to four schedule sets here. For more details please refer to 

Nailed-Up 
Connection

This field specifies if you want to make the connection to this remote node a nailed-
up connection. More details are given earlier in this section.

Session 
Options

Idle Timeout

Type the length of idle time (when there is no traffic from the ZyWALL to the remote 
node) in seconds that can elapse before the ZyWALL automatically disconnects the 
PPPoE connection. This option only applies when the ZyWALL initiates the call.