ZyXEL Communications 5 Series User Manual

 Chapter 3 Introducing the Web Configurator

ZyWALL 5/35/70 Series User’s Guide

Last Connection 
Up Time

This displays how long the 3G connection has been up.

Tx Bytes

This displays the total number of data frames transmitted.

Rx Bytes

This displays the total number of data frames received.

3G Card 
Manufacturer

This displays the manufacturer of your 3G card. 

3G Card Model

This displays the model name of your 3G card.

3G Card Firmware 
Revision

This displays the version of the firmware currently used in the 3G card.

3G Card IMEI

This displays the International Mobile Equipment Number (IMEI) which is the 
serial number of the 3G wireless card. IMEI is a unique 15-digit number used to 
identify a mobile device.

SIM Card IMSI

This displays the International Mobile Subscriber Identity (IMSI) stored in the SIM 
(Subscriber Identity Module) card. The SIM card is installed in a mobile device 
and used for authenticating a customer to the carrier network. IMSI is a unique 
15-digit number used to identify a user on a network.

3G Card ESN

This field is available only when you insert a CDMA (Code Division Multiple 
Access) 3G card.
This shows the ESN (Electronic Serial Number) of the inserted CDMA 3G card. 
The ESN is the serial number of a CDMA 3G card and is similar to the IMEI on a 
GSM or UMTS 3G card.

Enter PIN code 
again

If the PIN code you specified in the 3G (WAN 2) screen is not the right one for the 
card you inserted, this field displays allowing you to enter the correct PIN code. 
Enter the PIN code (four to eight digits) for the inserted 3G card.

Apply

Click Apply to save the correct PIN code and replace the one you specified in the 
3G (WAN 2) screen.

PUK Code

If you enter the PIN code incorrectly three times, the SIM card will be blocked by 
your ISP and you cannot use the account to access the Internet. You should get 
the PUK (Personal Unblocking Key) code (four to eight digits) from your ISP. 
Enter the PUK code to enable the SIM card. If an incorrect PUK code is entered 
10 times, the SIM card will be disabled permanently. You then need to contact 
your ISP for a new SIM card.

New PIN Code

Configure a PIN code for the SIM card. You can specify any four to eight digits to 
have a new PIN code or enter the previous PIN code.

Confirm New PIN 
Code

Enter the PIN code again for confirmation.

Apply

Click Apply to save your changes in this section.

Reset budget 
counters, resume 
budget control

This field displays if you have enabled budget control but insert a 3G card with a 
different user account from the one for which you configured budget control.
Select this option to have the ZyWALL do budget calculation starting from 0 but 
use the previous settings.

Resume budget 
control

This field displays if you have enabled budget control but insert a 3G card with a 
different user account from the one for which you configured budget control.
Select this option to have the ZyWALL keep the existing statistics and continue 
counting.

Table 4   Web Configurator HOME Screen in Router Mode (continued)