ZyXEL Communications 5 Series User Manual
Chapter 48 System Information & Diagnosis
ZyWALL 5/35/70 Series User’s Guide
724
Table 255 System Maintenance Menu Diagnostic
FIELD
DESCRIPTION
Ping Host
Enter 1 to ping any machine (with an IP address) on your LAN, DMZ, WLAN
or WAN. Enter its IP address in the Host IP Address field below.
or WAN. Enter its IP address in the Host IP Address field below.
WAN DHCP Release
Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal
Enter 3 to renew your WAN DHCP settings.
Internet Setup Test
or
PPPoE/PPTP/3G
Setup Test
or
PPPoE/PPTP/3G
Setup Test
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to
Menu 4 - Internet Access. Please refer to
for more
details.
This feature is only available for a 3G connection or dial-up connections
using PPPoE or PPTP encapsulation.
This feature is only available for a 3G connection or dial-up connections
using PPPoE or PPTP encapsulation.
Reboot System
Enter 11 to reboot the ZyWALL.
WAN
If you entered 2, 3, or 4 in the Enter Menu Selection Number field, enter the
number of the WAN interface in this field.
number of the WAN interface in this field.
Host IP Address
If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
address of the computer you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.