ZyXEL Communications 5 Series User Manual
Chapter 52 IP Policy Routing
ZyWALL 5/35/70 Series User’s Guide
751
2 Select Edit in the Select Command field; type the index number of the rule you want to
configure in the Select Rule field and press [ENTER] to open Menu 25.1 - IP Routing
Policy Setup (see the next figure).
Policy Setup (see the next figure).
Figure 489 Menu 25.1: IP Routing Policy Setup
The following table describes the fields in this screen.
Menu 25.1 - IP Routing Policy Setup
Rule Index= 1 Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal Packet length= 40
Precedence = 0 Len Comp= Equal
Source:
addr start= 1.1.1.1 end= 1.1.1.1
port start= 20 end= 25
Destination:
addr start= 2.2.2.2 end= 2.2.2.5
port start= 20 end= 25
Action= Matched
Gateway Type= IP Address
Gateway addr = 192.168.1.1 Redirect packet= N/A
Type of Service= Max Thruput Log= No
Precedence = 0
Edit policy to packets received from= No
Press ENTER to Confirm or ESC to Cancel:
Table 265 Menu 25.1: IP Routing Policy Setup
FIELD
DESCRIPTION
Rule Index
This is the index number of the routing policy selected in Menu 25 - IP Routing
Policy Summary.
Policy Summary.
Active
Press [SPACE BAR] and then [ENTER] to select Yes to activate the policy.
Criteria
IP Protocol
Enter a number that represents an IP layer 4 protocol, for example, UDP=17,
TCP=6, ICMP=1 and Don't care=0.
TCP=6, ICMP=1 and Don't care=0.
Type of Service
Prioritize incoming network traffic by choosing from Don't Care, Normal, Min
Delay, Max Thruput or Max Reliable.
Delay, Max Thruput or Max Reliable.
Precedence
Precedence value of the incoming packet. Press [SPACE BAR] and then [ENTER]
to select a value from 0 to 7 or Don't Care.
to select a value from 0 to 7 or Don't Care.
Packet Length
Type the length of incoming packets (in bytes). The operators in the Len Comp
(next field) apply to packets of this length.
(next field) apply to packets of this length.
Len Comp
Press [SPACE BAR] and then [ENTER] to choose from Equal, Not Equal, Less,
Greater, Less or Equal or Greater or Equal.
Greater, Less or Equal or Greater or Equal.
Source
addr start / end
Source IP address range from start to end.
port start / end
Source port number range from start to end; applicable only for TCP/UDP.
Destination