ZyXEL Communications 5 Series User Manual

Chapter 3 Introducing the Web Configurator

ZyWALL 5/35/70 Series User’s Guide

The following table describes the labels in this screen.

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a server. You can configure the 
ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides 
the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another 
DHCP server on your LAN, or else the computer must be manually configured.

Click Show DHCP Table in the HOME screen when the ZyWALL is set to router mode. 
Read-only information here relates to your DHCP status. The DHCP table shows current 
DHCP client information (including IP Address, Host Name and MAC Address) of all 
network clients using the ZyWALL’s DHCP server.

Figure 19   HOME > Show DHCP Table

The following table describes the labels in this screen.

Table 9   HOME > Show Statistics > Line Chart

Click the icon to go back to the Show Statistics screen.

Port

Select the check box(es) to display the throughput statistics of the corresponding 
interface(s).

B/s

Specify the direction of the traffic for which you want to show throughput statistics in 
this table. 
Select Tx to display transmitted traffic throughput statistics and the amount of traffic 
(in bytes). Select Rx to display received traffic throughput statistics and the amount 
of traffic (in bytes).

Throughput 
Range

Set the range of the throughput (in B/s, KB/s or MB/s) to display.
Click Set Range to save this setting back to the ZyWALL. 

Table 10   HOME > Show DHCP Table

Interface

Select LAN, DMZ or WLAN to show the current DHCP client information for the 
specified interface.

# 

This is the index number of the host computer. 

IP Address

This field displays the IP address relative to the # field listed above.

Host Name 

This field displays the computer host name.