ZyXEL Communications 5 Series User Manual
Chapter 4 Wizard Setup
ZyWALL 5/35/70 Series User’s Guide
91
Figure 25 ISP Parameters: PPTP Encapsulation
The following table describes the labels in this screen.
Table 15 ISP Parameters: PPTP Encapsulation
LABEL
DESCRIPTION
ISP Parameters for
Internet Access
Internet Access
Encapsulation
Select PPTP from the drop-down list box. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Retype to Confirm
Type your password again for confirmation.
Nailed-Up Select
Nailed-Up if you do not want the connection to time out.
Idle Timeout
Type the time in seconds that elapses before the router automatically
disconnects from the PPTP server.
disconnects from the PPTP server.
PPTP
Configuration
Configuration
My IP Address
Type the (static) IP address assigned to you by your ISP.
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address
Type the IP address of the PPTP server.
Connection ID/
Name
Name
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.