ZyXEL Communications max208m User Manual

 Chapter 7 Network Setting

WiMAX Device Configuration User’s Guide

This screen contains the following fields:

This screen is available for models with WiFi wireless feature. Use this screen to restrict access to 
the WiFi network by device ID (MAC address). 

Click on Network Setting > WLAN > MAC Address Filter. The screen appears as shown.

MAC Address Filter Screen

This screen contains the following fields:

WPS

Enable WPS

Select Enable and click Apply to activate WPS on the WiMAX Device. Select 
Disable and click Apply to deactivate WPS.

Start WPS PBC

This field is available after you select Enable in the Enable WPS field and click 
Apply.

Click this to activate the Push Button Configuration. After clicking this you will be 
able to use the WPS button at the back of the device to add new wireless clients.

Note: You must press the WPS buttons within two minutes of each other.

MAC Address Filter

Enable MAC 
Address Filter

Select the check box to enable MAC address filtering. Then, the following fields 
display.

Mode

Define the filter action for the list of MAC addresses in the MAC address table.

Select Allow listed stations to permit access to the WiMAX Device only to 
addresses listed. MAC addresses not listed will be denied access to the WiMAX 
Device.

Select Deny listed stations to block access to the WiMAX Device to the 
computers or devices listed in this list.

#

This is the index number of the MAC address.

Active

Select this box to make the policy effective or ineffective for a particular device.

Name

Type the name of the device. The name can be up to 20 characters long, and any 
combination of letters, numbers or symbols.