ZyXEL Communications max208m User Manual

Chapter 7 Network Setting

WiMAX Device Configuration User’s Guide

Use the wizard to create a port trigger rules that will allow the WiMAX Device to automate port 
forwarding and allow computers on local network to provide services that would normally require a 
fixed address on the local network.

Click Network Setting > NAT > Port Trigger > Wizard

Port Trigger Wizard Screen

This screen contains the following fields:

Port Trigger Wizard

Active

Select this to make this port trigger rule active.

Port Trigger Rule

Select the type of port trigger rule.

Rule Name

Enter a name for the port trigger rule.

Trigger Protocol

Select the type of port trigger protocol.

Trigger Start Port

Enter the port trigger start port.

Trigger End Port

Enter the port trigger end port.

Open Protocol

Select the type of open protocol for the port trigger rule.

Open Start Port

Select the starting open port for the port trigger rule.

Open End Port

Select the ending open port number for the port trigger rule.