ZyXEL Communications max208m User Manual

Chapter 8 Security

WiMAX Device Configuration User’s Guide

This screen contains the following fields:

Use this screen to allow ("whitelist") or block ("blacklist") connections to and from specific devices 
on the network based on their unique MAC addresses.

Note: This feature only works when the WiMAX Device is in bridge mode.

IP Filter

Active

Indicates whether the current IP filter is active or not.

Source IP

This displays the source IP address for the IP filter rule.

Click Add to create a new, empty rule, then enter the incoming IP address for 
the WiMAX Device to block.

If you want to delete this rule, click the Delete icon.

Source Port

This displays the source port number for the IP filter rule.

Click Add to create a new, empty rule, then enter the incoming port number for 
the WiMAX Device to block.

If you want to delete this rule, click the Delete icon.

Destination IP

This displays the destination IP address for the IP filter rule.

Click Add to create a new, empty rule, then enter the outgoing IP address for 
the WiMAX Device to block.

If you want to delete this rule, click the Delete icon.

Destination Port

This displays the destination port number for the IP filter rule.

Click Add to create a new, empty rule, then enter the outgoing port number for 
the WiMAX Device to block.

If you want to delete this rule, click the Delete icon.

Protocol

This displays the protocol blocked by the IP filter rule.

Click Add to create a new, empty rule, then select the protocol type for the 
WiMAX Device to block.

If you want to delete this rule, click the Delete icon.

Delete

Click this to delete a specified rule.

Add

Click this to add a new filter rule.

OK

Click this to save any changes made to the list.