ZyXEL Communications max208m User Manual

Chapter 12 Maintenance

WiMAX Device Configuration User’s Guide

Click Maintenance > Remote MGMT > CWMP to open this screen as shown next.

CWMP Screen

This screen contains the following fields:

CWMP

Enable

Select this to enable remote management using this service.

ACS Server URL

Enter the URL or IP address of the auto-configuration server.

Bootstrap Enable

Select this to enable bootstrap events.

ACS Username

Enter the user name sent when the WiMAX Device connects to the ACS and 
which is used for authentication.

You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores 
but spaces are not allowed.

ACS Password

Enter the password sent when the WiMAX Device connects to an ACS and which 
is used for authentication.

You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores 
but spaces are not allowed.

Periodical Inform 
Enable

Select this to allow the WiMAX Device to periodically connect to the ACS and 
check for configuration updates. 

If you do not enable this feature then the WiMAX Device can only be updated 
automatically when the ACS initiates contact with it and if you selected the 
checkbox on this screen.

Periodical Inform 
Interval

Enter the time interval (in seconds) at which the WiMAX Device connects to the 
auto-configuration server.

Connection 
Request 
Username

Enter the connection request user name that the ACS must send to the WiMAX 
Device when it requests a connection.

You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores 
but spaces are not allowed.

Note: This must be provided by the ACS administrator.