ZyXEL Communications max208m User Manual
Chapter 6 WiMAX
WiMAX Device Configuration User’s Guide
84
This screen contains the following fields:
Table 20
Connect
LABEL
DESCRIPTION
Applied Frequency Information
This table shows the scanning result you made in the WiMAX > Profile > Frequency Settings and
WiMAX > Wide Scan screens.
WiMAX > Wide Scan screens.
Note: You cannot see the wide scanning result that you made in WiMAX > Wide Scan screen if the
Join Wide Scan Result
is set to No in the WiMAX > Profile > Frequency Settings screen.
Applied Frequency Information
Frequency
(KHz)
This field displays the available center frequency of a frequency band in kilohertz
(KHz).
(KHz).
Bandwidth
(MHz)
This field displays the bandwidth of the frequency band in megahertz (MHz).
Available Network List
Connected
Mode
Select a connect mode:
•
Auto Connect Mode - This allows the WiMAX Device to connect to any of
the base stations on the list automatically.
•
Network Search Mode - This allows the WiMAX Device to connect to a
user-specified base station. Select this option, choose a base station, click
Connect.
•
NSP Mode - This allows the WiMAX Device to connect to a base station with
a user-specified NSP ID. To specify the NSP ID, select a result in the list and
click Connect. The WiMAX Device will automatically connect to a base
station with the same NSP ID, and the best CINR or RSSI.
•
NSP/NAP Mode - This allows the WiMAX Device to connect to a base station
with a user-specified NSP ID and NAP ID. To specify the NSP ID and NAP ID,
select a result in the list and click Connect. The WiMAX Device will
automatically connect to a base station with the same NSP ID and NAP ID,
and the best CINR or RSSI.
•
NSP/NAP/BSID Mode - This allows the WiMAX Device to connect to a base
station with a user-specified NSP ID, NAP ID and BSID. To specify the NSP
ID, NAP ID and BSID, select a result in the list and click Connect. The
WiMAX Device will automatically connect to a base station with the same NSP
ID, NAP ID and BSID, and the best CINR or RSSI.
Connect
Click this to connect to the selected base station.
Disconnect
Click this to disconnect from the selected base station.
BSID
This field displays the base station MAC address.
NSP
This field displays the NSP ID.
NAP
This field displays the NAP ID.
Network Type
This field displays the network type.
Preamble ID
This field displays the preamble ID.
The preamble ID is the index identifier in the header of the base station’s
broadcast messages. In the beginning of a mobile stations’s network entry
process, it searches for the preamble and uses it to additional channel
information.
broadcast messages. In the beginning of a mobile stations’s network entry
process, it searches for the preamble and uses it to additional channel
information.
The preamble ID is used to synchronize the upstream and downstream
transmission timing with the base station.
transmission timing with the base station.
Frequency
(MHz)
This field displays the center frequency the base station uses in kilohertz (KHz).
Bandwidth
(MHz)
This field displays the frequency band bandwidth the base station uses in
megahertz (MHz).
megahertz (MHz).