ZyXEL Communications max208m User Manual
Chapter 10 The VoIP Account Screens
WiMAX Device Configuration User’s Guide
161
10.3 Server
Click VoIP > Account 1 (or Account 2) > Server to configure the registrar server, proxy server
and outbound proxy server for this SIP account.
and outbound proxy server for this SIP account.
Figure 93
Server
The following table describes the labels in this screen.
Account
Status
This indicates whether the SIP account is activated or not. Enable means
activated and Disable means deactivated.
activated and Disable means deactivated.
Phone Status
This field displays the phone status, such as Idle, Calling, Ringing,
Connecting, InCall, Hold, and Disconnecting.
Connecting, InCall, Hold, and Disconnecting.
Call History
Received call
This field displays the number of calls you have received through the connected
phone since the WiMAX Device last restarted or was turned on.
phone since the WiMAX Device last restarted or was turned on.
Missing call
This field displays the number of calls you have missed since the WiMAX Device
last restarted or was turned on.
last restarted or was turned on.
Outgoing call
This field displays the number of calls you have made through the connected
phone since the WiMAX Device last restarted or was turned on.
phone since the WiMAX Device last restarted or was turned on.
Connect
Click this to register the WiMAX Device to the specified register server.
Disconnect
Click this to de-register the WiMAX Device with the register server.
Table 70
Status (continued)
LABEL
DESCRIPTION
Table 71
Server
LABEL
DESCRIPTION
Registrar Server
Registrar
Server
Enter the IP address or domain name of a register server. You can use up to 63
printable ASCII characters.
printable ASCII characters.
Port Number
Enter the SIP server’s listening port number. Keep the default value, if you are
not sure of this value.
not sure of this value.