ZyXEL Communications MWR102 User Manual
18
Figure 3 Login Screen
The following table describes the labels in this screen.
LABEL
LABEL
DESCRIPTION
User Name
Type “admin” (default) as the User name.
Password
Type “1234” (default) as the password.
2.3 Resetting the MWR102
If you forget your password or IP address, or you cannot access the Web-Based Management
Interface, you will need to use the RESET button at the back of the MWR102 to reload the
factory-default configuration file. This means that you will lose all configurations that you had
previously saved, the password will be reset to “1234” and the IP address will be reset to
“192.168.100.1”.
Interface, you will need to use the RESET button at the back of the MWR102 to reload the
factory-default configuration file. This means that you will lose all configurations that you had
previously saved, the password will be reset to “1234” and the IP address will be reset to
“192.168.100.1”.
2.3.1 Procedure to Use the Reset Button
1 Make sure the power LED is on.
2 Press the RESET button for longer than one second to restart/reboot the MWR102.
3 Press the RESET button for longer than five seconds to set the MWR102 back to its factory-
default configurations. The Power LED will start to blink to indicate that the default configuration is
being loaded.
2 Press the RESET button for longer than one second to restart/reboot the MWR102.
3 Press the RESET button for longer than five seconds to set the MWR102 back to its factory-
default configurations. The Power LED will start to blink to indicate that the default configuration is
being loaded.