ZyXEL Communications MAX-306M1 User Manual

 Chapter 18 The Remote Management Screens

User’s Guide

Click TOOLS > Remote Management > SNMP to access this screen. Use SNMP 
options to control SNMP access to your WiMAX Modem.

Figure 91   TOOLS > Remote Management > SNMP

The following table describes the labels in this screen.

Table 75   TOOLS > Remote Management > SNMP

SNMP Configuration
Get Community

Enter the Get Community, which is the password for the incoming 
Get and GetNext requests from the management station. The default 
is public and allows all requests.

Set Community

Enter the Set community, which is the password for incoming Set 
requests from the management station. The default is public and 
allows all requests.

Trap Community

Enter the trap community, which is the password sent with each trap 
to the SNMP manager. The default is public and allows all requests.

Trap Destination

Enter the IP address of the station to send your SNMP traps to.

SNMP
Port

You may change the server port number for a service if needed, 
however you must use the same port number in order to use that 
service for remote management.

Access Status

Select the interface(s) through which a computer may access the 
WiMAX Modem using this service.