ZyXEL Communications MAX-306M1 User Manual

 Chapter 21 The Status Screen

User’s Guide

Click Status > DHCP Table to open this screen. This read-only screen shows SIP 
registration information, status of calls and VoIP traffic statistics. These settings 
can be configured in the VOICE > Service Configuration > SIP Setting screen.

Figure 105   VoIP Statistics

Each field is described in the following table.

Table 107   VoIP Statistics 

SIP Status
Port

This column displays each SIP account in the WiMAX Modem.

Status

This field displays the current registration status of the SIP account. 
You can change this in the Status screen.

Registered - The SIP account is registered with a SIP server.

Register Fail - The last time the WiMAX Modem tried to register the 
SIP account with the SIP server, the attempt failed. The WiMAX Modem 
automatically tries to register the SIP account when you turn on the 
WiMAX Modem or when you activate it.

Inactive - The SIP account is not active. You can activate it in VOICE 
> SIP > SIP Settings.

Last 
Registration

This field displays the last time you successfully registered the SIP 
account. It displays N/A if you never successfully registered this 
account.

URI

This field displays the account number and service domain of the SIP 
account. You can change these in VOICE > SIP > SIP Settings.

Protocol

This field displays the transport protocol the SIP account uses. SIP 
accounts always use UDP.

Message 
Waiting

This field indicates whether or not there are any messages waiting for 
the SIP account.

Last Incoming 
Number

This field displays the last number that called the SIP account. It 
displays N/A if no number has ever dialed the SIP account.