ZyXEL Communications MAX-306M1 User Manual

Chapter 7 The LAN Configuration Screens

User’s Guide

Click ADVANCED > LAN Configuration > Static DHCP to assign specific IP 
addresses to specific computers on the LAN.

Note: This screen has no effect if the DHCP server is not enabled. You can enable it 

in ADVANCED > LAN Configuration > DHCP Setup.

Figure 21   ADVANCED > LAN Configuration > Static DHCP

The following table describes the labels in this screen. 

Table 14   ADVANCED > LAN Configuration > Static DHCP

#

The number of the item in this list.

MAC Address

Enter the MAC address of the computer to which you want the WiMAX 
Modem to assign the same IP address.

IP Address

Enter the IP address you want the WiMAX Modem to assign to the 
computer.

Apply

Click to save your changes.

Reset

Click to restore your previously saved settings.