ZyXEL Communications MAX-306M1 User Manual
Chapter 8 The WAN Configuration Screens
User’s Guide
90
8.3 WiMAX Configuration
Click ADVANCED > WAN Configuration > WiMAX Configuration to set up the
frequencies used by your WiMAX Modem.
frequencies used by your WiMAX Modem.
In a WiMAX network, a mobile or subscriber station must use a radio frequency
supported by the base station to communicate. When the WiMAX Modem looks for
a connection to a base station, it can search a range of frequencies.
supported by the base station to communicate. When the WiMAX Modem looks for
a connection to a base station, it can search a range of frequencies.
Get
automatically
from ISP
(Default)
automatically
from ISP
(Default)
Select this if you have a dynamic IP address. A dynamic IP address
is not fixed; the ISP assigns you a different one each time you
connect to the Internet.
is not fixed; the ISP assigns you a different one each time you
connect to the Internet.
Use Fixed IP
Address
Address
A static IP address is a fixed IP that your ISP gives you. Type your
ISP assigned IP address in the IP Address field below.
ISP assigned IP address in the IP Address field below.
IP Subnet Mask
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are
implementing subnetting.
implementing subnetting.
Gateway IP
Address
Address
Specify a gateway IP address (supplied by your ISP).
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Table 19 ADVANCED > WAN Configuration > Internet Connection > ISP
Parameters for Internet Access (continued)
Parameters for Internet Access (continued)
LABEL
DESCRIPTION