ZyXEL Communications P-660HW-TX User Manual

P-660HW-Tx v2 Series Support Notes

Product FAQ

1. How can I manage P-660HW-Tx v2?

Multilingual Embedded Web GUI for Local and Remote management

CLI (Command-line interface)

Telnet support (Administrator Password Protected ) for remote
configuration change and status monitoring

FTP/ TFTP sever, firmware upgrade and configuration backup and
restore are supported(Administrator Password Protected)

2. What is the default password for Web Configurator?

There are two different accounts for P-660HW-Tx v2 Web Configurator:
Common User Account and Administrator Account.
By factory default the password for the two accounts are:

• Common User Account: user
• Administrator

Account: 1234.

You can change the password after you logging in the Web Configurator.

Please record your new password whenever you change it. The system
will lock you out if you have forgotten your password.

3. What’s the difference between ‘Common User Account’ and
‘Administrator Account’?

For Common User Account, it can only access the status monitor of
P-660HW-Tx v2 and check the current system status.

For Administrator Account, besides accessing the status monitor of
P-660HW-Tx v2, it can also access Winzard setup / Advanced setup of
P-660HW-Tx v2.

Moreover, only with Administrator Password, you could manage the
P-660HW-Tx v2 via FTP/TFTP or Telnet.

4. How do I know the P-660HW-Tx v2's WAN IP address assigned by the
ISP?

You can view "My WAN IP <from ISP> : x.x.x.x" shown in Web Configurator
‘Status->Device Information ->WAN Information’ to check this IP address.