ZyXEL Communications P-660HW-TX User Manual

P-660HW-Tx v2 Series Support Notes

services of the line will be. After that, system will save back the correct VPI,
VCI and also services (encapsulation) type into profile of WAN interface.

• Configure the VC auto-hunting preconfigured table.

(1) Display auto-haunting preconfigured table by using command from CLI:

wan atm vchunt disp

(2) Add items to the auto-haunting preconfigured table by using commands:

wan atm vchunt add <remoteNodeIndex> <vpi> <vci> <service

bit(hex)>
   wan atm vchunt save
Note: <remote node> : input the remote node index 1-8
    <vpi> : vpi value
    <vci> : vci value
  <service>: it’s a hex value, bit0:PPPoE/VC (1), bit1:PPPoE/LLC (2) ,
bit2:PPPoA/VC (4), bit3:PPPoA/LLC (8), bit4:Enet/VC (16), bit5 :Enet/LLC (32)

For example:

(1) If you need service PPPoE/LLC and Enet/LLC then the service bits will be

2+32 = 34 (decimal) = 22 (hex), you must input 22

(2) If you want to enable all service for VC hunting, the service bits will be

1+2+4+8+16+32=63(decimal)= 3f (hex), you must input 3f

Need to perform save after this by command ‘wan atm vchunt save’