ZyXEL Communications P-660HW-T1 User Manual

P-660H/HW/W-T Series User’ Guide

Chapter 18 Introducing the SMT

212

Change the Prestige default password by following the steps shown next. 

1 Enter 23 in the main menu to display Menu 23 - System Security.

2 Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.

3 Type your existing system password in the Old Password field, for example “

1234

", and 

press [ENTER].

Figure 109   Menu 23.1 Change Password

4 Type your new system password in the New Password field (up to 30 characters), and 

press [ENTER].

5 Re-type your new system password in the Retype to confirm field for confirmation and 

press [ENTER].

3

LAN Setup

Use this menu to set up your wireless LAN and LAN connection.

4

Internet Access Setup

A quick and easy way to set up an Internet connection.

11

Remote Node Setup

Use this menu to set up the Remote Node for LAN-to-LAN 

connection, including Internet connection.

12

Static Routing Setup

Use this menu to set up static routes. 

14

Dial-in User Setup

Use this menu to set up local user profiles on the Prestige.

15

NAT Setup

Use this menu to specify inside servers when NAT is enabled.

21

Filter and Firewall Setup  Use this menu to configure filters, activate/deactivate the firewall 

and view the firewall log.

22

SNMP Configuration 

Use this menu to set up SNMP related parameters.

23

System Security

Use this menu to set up wireless security and change your 

password.

24

System Maintenance

This menu provides system status, diagnostics, software upload, 

etc.

25

IP Routing Policy Setup

Use this menu to configure your IP routing policy.

26

Schedule Setup

Use this menu to schedule outgoing calls.

99

Exit

Use this to exit from SMT and return to a blank screen.

Table 73   Main Menu Summary

Menu 23.1 - System Security - Change Password

    Old Password= ?
    New Password= ?
    Retype to confirm=?

Enter here to CONFIRM or ESC to CANCEL: