ZyXEL Communications P-660HNU-Fx User Manual

Chapter 24 Backup/Restore

ADSL Series User’s Guide

Restore Configuration allows you to upload a new or previously saved configuration file from your 
computer to your ZyXEL Device.

After the ZyXEL Device configuration has been restored successfully, the login screen appears. 
Login again to restart the ZyXEL Device. 

The ZyXEL Device automatically restarts in this time causing a temporary network disconnect. In 
some operating systems, you may see the following icon on your desktop.

Network Temporarily Disconnected

If you restore the default configuration, you may need to change the IP address of your computer 
to be in the same subnet as that of the default device IP address (192.168.1.1). See 

 for details on how to set up your computer’s IP address.

If the upload was not successful, an error screen will appear. Click OK to go back to the 
Configuration screen. 

Click the Reset button to clear all user-entered configuration information and return the ZyXEL 
Device to its factory defaults. The following warning screen appears.

Reset Warning Message

Wait until the ZyXEL Device’s login screen appears. You can also press the RESET button on the 
rear panel to reset the factory defaults of your ZyXEL Device. Refer to 

 for 

more information on the RESET button.

Restore Configuration

File Path 

Type in the location of the file you want to upload in this field or click Browse ... to find it.

Browse... 

Click this to find the file you want to upload. Remember that you must decompress 
compressed (.ZIP) files before you can upload them. 

Upload 

Click this to begin the upload process.

Reset

Click this to reset your device settings back to the factory default.