ZyXEL Communications P-660HNU-Fx User Manual
Chapter 26 Troubleshooting
ADSL Series User’s Guide
249
4
Reset the device to its factory defaults, and try to access the ZyXEL Device with the default IP
address. See
address. See
.
5
If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.
suggestions.
Advanced Suggestions
• Try to access the ZyXEL Device using another service, such as Telnet. If you can access the
ZyXEL Device, check the remote management settings and firewall rules to find out why the
ZyXEL Device does not respond to HTTP.
ZyXEL Device does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a computer that is
connected to an ETHERNET port.
I can see the Login screen, but I cannot log in to the ZyXEL Device.
1
Make sure you have entered the user name and password correctly. The default user name is
admin. These fields are case-sensitive, so make sure [Caps Lock] is not on.
admin. These fields are case-sensitive, so make sure [Caps Lock] is not on.
2
You cannot log in to the web configurator while someone is using Telnet to access the ZyXEL Device.
Log out of the ZyXEL Device in the other session, or ask the person who is logged in to log out.
Log out of the ZyXEL Device in the other session, or ask the person who is logged in to log out.
3
Turn the ZyXEL Device off, wait for one minute and turn it back on.
4
If this does not work, you have to reset the device to its factory defaults. See
.
I cannot telnet to the ZyXEL Device.
Ignore the suggestions about your browser.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload
new firmware.
Ignore the suggestions about your browser.