ZyXEL Communications P-660HNU-Fx User Manual
Chapter 5 Broadband
ADSL Series User’s Guide
98
5.2.1.4 Bridge Mode
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select Bridge as the encapsulation mode. The
following screen appears.
next to the connection you want to configure. Select Bridge as the encapsulation mode. The
following screen appears.
PPP Password
Enter the password associated with the user name above.
Authentication
Method
Method
The ZyXEL Device supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
Options are:
AUTO: Your ZyXEL Device accepts either CHAP or PAP when requested by this remote
node.
node.
PAP: Your ZyXEL Device accepts PAP only.
CHAP: Your ZyXEL Device accepts CHAP only.
MSCHAP: Your ZyXEL Device accepts MSCHAP only. MS-CHAP is the Microsoft version
of the CHAP.
of the CHAP.
Use Static IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select this if you do not have a dynamic IP address.
Select this if you do not have a dynamic IP address.
IP Address
Enter the static IP address provided by your ISP. You will only see this field if you
select Use Static IP Address
select Use Static IP Address
MTU
The Maximum Transmission Unit (MTU) defines the size of the largest packet allowed
on an interface or connection. Enter the MTU in this field.
on an interface or connection. Enter the MTU in this field.
For PPPoA and the default MTU is 1492.
Routing Feature
NAT Enable
Select this option to activate NAT on this connection.
IGMP Proxy Enable
Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish
membership in a Multicast group - it is not used to carry user data.
membership in a Multicast group - it is not used to carry user data.
Select this option to have the ZyXEL Device act as an IGMP proxy on this connection.
This allows the ZyXEL Device to get subscribing information and maintain a joined
member list for each multicast group. It can reduce multicast traffic significantly.
This allows the ZyXEL Device to get subscribing information and maintain a joined
member list for each multicast group. It can reduce multicast traffic significantly.
Apply as Default
Gateway
Gateway
Select this option to have the ZyXEL Device use the WAN interface of this connection
as the system default gateway.
as the system default gateway.
DNS Server - This section is not available when you select Bridge in the WAN Service Type field.
Obtain DNS info
Automatically
Automatically
Select this to have the ZyXEL Device get the DNS server addresses from the ISP
automatically.
automatically.
Use the following
Static DNS IP
Address
Static DNS IP
Address
Select this to have the ZyXEL Device use the DNS server addresses you configure
manually.
manually.
Primary DNS
Server
Enter the first DNS server address assigned by the ISP.
Secondary DNS
Server
Enter the second DNS server address assigned by the ISP.
Apply
Click Apply to save your changes.
Back
Click Back to return to the previous screen.
Table 13
Broadband Add/Edit: Routing- PPPoA
Label
DESCRIPTION