ZyXEL Communications P-334 User Manual

Prestige 334 User’s Guide

99

Chapter 7 Network Address Translation (NAT) Screens

1 Trigger events only happen on data that is going coming from inside the Prestige and 

going to the outside.

2 If an application needs a continuous data stream, that port (range) will be tied up so that 

another computer on the LAN can’t trigger it. 

To change your Prestige’s trigger port settings, click SUA/NAT and the Trigger Port tab. The 
screen appears as shown.

Figure 34   Trigger Port

The following table describes the labels in this screen.

Note: Only one LAN computer can use a trigger port (range) at 
a time

Table 27   Trigger Port

#

This is the rule index number (read-only).

Name

Type a unique name (up to 15 characters) for identification purposes. All characters 

are permitted - including spaces.