ZyXEL Communications MES3500-24F User Manual
Chapter 35 Differentiated Services
MES3500-24/24F User’s Guide
273
35.3.2 Configuring DSCP Profiles
Use this screen to configure DSCP profiles. Click the DSCP Profile link in the 2-Rate 3 Color
Marker screen to display the screen as shown next.
Marker screen to display the screen as shown next.
Figure 157
IP Application > DiffServ > 2-rate 3 Color Marker > DSCP Profile
The following table describes the labels in this screen.
Commit
Rate
Rate
Specify the Commit Information Rate (CIR) for this port.
Peak
Rate
Rate
Specify the Peak Information Rate (PIR) for this port.
DSCP
Select the DSCP profile that you want to apply to packets on this port. In a DSCP profile you can
specify the DSCP values to assign to packets based on the color they are marked via TRTCM.
specify the DSCP values to assign to packets based on the color they are marked via TRTCM.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 108
IP Application > DiffServ > 2-rate 3 Color Marker (continued)
LABEL
DESCRIPTION
Table 109
IP Application > DiffServ > 2-rate 3 Color Marker > DSCP Profile
LABEL
DESCRIPTION
Profile
Name
Name
Type a descriptive name (up to 32 printable ASCII characters) for this profile. This is for
identification only.
identification only.
Green
Specify the DSCP value to use for packets with low packet loss priority.
Yellow
Specify the DSCP value to use for packets with medium packet loss priority.
Red
Specify the DSCP value to use for packets with high packet loss priority.
Add
Click Add to insert a new DSCP profile to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to reset the above fields to your previous configuration.
Profile
Name
Name
This field displays the name of the DSCP priofile. Click the name to edit the profile settings.