ZyXEL Communications MES3500-24F User Manual

Chapter 43 ARP Table

MES3500-24/24F User’s Guide

Click Management > ARP Table in the navigation panel to open the following screen. Use the ARP 
table to view IP-to-MAC address mapping(s) and remove specific dynamic ARP entries.

Management > ARP Table 

The following table describes the labels in this screen. 

Management > ARP Table 

Condition

Specify how you want the Switch to remove ARP entries when you click Flush.

Select All to remove all of the dynamic entries from the ARP table.

Select IP Address and enter an IP address to remove the dynamic entries learned with the 
specified IP address.

Select Port and enter a port number to remove the dynamic entries learned on the specified 
port.

Flush

Click Flush to remove the ARP entries according to the condition you specified.

Cancel

Click Cancel to return the fields to the factory defaults.

Index

This is the ARP table entry number.

IP Address

This is the learned IP address of a device connected to a Switch port with the corresponding 
MAC address below.

MAC Address

This is the MAC address of the device with the corresponding IP address above.

VID

This field displays the VLAN to which the device belongs.

Port

This field displays the port to which the device connects. CPU means this learned IP address 
is the Switch’s management IP address.

Type

This shows whether the MAC address is dynamic (learned by the Switch) or static (manually 
entered in the Static MAC Forwarding screen).