ZyXEL Communications MES3500-24F User Manual
Chapter 4 The Web Configurator
MES3500-24/24F User’s Guide
43
AAA
This link takes you to a screen where you can configure authentication,
authorization and accounting services via external servers. The external servers
can be either RADIUS (Remote Authentication Dial-In User Service) or TACACS+
(Terminal Access Controller Access-Control System Plus).
authorization and accounting services via external servers. The external servers
can be either RADIUS (Remote Authentication Dial-In User Service) or TACACS+
(Terminal Access Controller Access-Control System Plus).
IP Source Guard
This link takes you to screens where you can configure filtering of unauthorized
DHCP and ARP packets in your network.
DHCP and ARP packets in your network.
Loop Guard
This link takes you to a screen where you can configure protection against
network loops that occur on the edge of your network.
network loops that occur on the edge of your network.
VLAN Mapping
This link takes you to screens where you can configure VLAN mapping settings on
the Switch.
the Switch.
Layer 2 Protocol
Tunneling
Tunneling
This link takes you to a screen where you can configure L2PT (Layer 2 Protocol
Tunneling) settings on the Switch.
Tunneling) settings on the Switch.
sFlow
This link takes you to screens where you can configure sFlow settings on the
Switch.
Switch.
PPPoE
This link takes you to screens where you can configure how the Switch gives a
PPPoE termination server additional subscriber information that the server can
use to identify and authenticate a PPPoE client.
PPPoE termination server additional subscriber information that the server can
use to identify and authenticate a PPPoE client.
Errdisable
This link takes you to a screen where you can configure CPU protection and error
disable recovery.
disable recovery.
Private VLAN
This link takes you to a screen where you can block traffic between ports in a
VLAN on the Switch.
VLAN on the Switch.
IP Application
Static Routing
This link takes you to a screen where you can configure static routes. A static
route defines how the Switch should forward traffic by configuring the TCP/IP
parameters manually.
route defines how the Switch should forward traffic by configuring the TCP/IP
parameters manually.
DiffServ
This link takes you to screens where you can enable DiffServ, configure marking
rules and set DSCP-to-IEEE802.1p mappings.
rules and set DSCP-to-IEEE802.1p mappings.
DHCP
This link takes you to screens where you can configure the DHCP settings.
Management
Maintenance
This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
file maintenance as well as reboot the system.
Access Control
This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
and configure SNMP and remote management.
Diagnostic
This link takes you to screens where you can view system logs and can test
port(s).
port(s).
Syslog
This link takes you to screens where you can setup system logs and a system log
server.
server.
Cluster
Management
Management
This link takes you to a screen where you can configure clustering management
and view its status.
and view its status.
MAC Table
This link takes you to a screen where you can view the MAC address and VLAN ID
of a device attached to a port. You can also view what kind of MAC address it is.
of a device attached to a port. You can also view what kind of MAC address it is.
ARP Table
This link takes you to a screen where you can view the MAC address – IP address
resolution table.
resolution table.
Configure Clone
This link takes you to a screen where you can copy attributes of one port to
(an)other port(s).
(an)other port(s).
Table 4
Navigation Panel Links (continued)
LINK
DESCRIPTION