ZyXEL Communications MES3500-24F User Manual

 Chapter 8 Basic Setting

MES3500-24/24F User’s Guide

Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the 
navigation panel to display the configuration screen. 

Basic Setting > Port Setup 

The following table describes the labels in this screen. 

Delete

Check the management IP addresses that you want to remove in the Delete column, 
then click the Delete button.

Cancel

Click Cancel to clear the selected check boxes in the Delete column.

Basic Setting > IP Setup  (continued)

Basic Setting > Port Setup 

Port

This is the port index number. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first 
to set the common settings and then make adjustments on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you make them.

Active

Select this check box to enable a port. The factory default for all ports is enabled. A port must 
be enabled for data transmission to occur.

Name

Enter a descriptive name that identifies this port. You can enter up to 64 alpha-numerical 
characters. 

Note: Due to space limitation, the port name may be truncated in some web configurator 

screens. 

Type

This field displays 10/100M for Fast Ethernet connections and 10/100/1000M for Gigabit 
connections.